CHICCO Electric steam sterilizer with drying function

The sterilizer with drying function guarantees the disinfection of baby bottles and other items thanks to the sterilizing capabilities of natural steam. It is the most advanced solution to sterilise quickly, naturally and efficiently in just 5 minutes. It can hold up to 6 bottles and accessories.

In addition, the superior drying function guarantees the removal of droplets and residual moisture and condensates. It can be easily and intuitively programmed on the touch panel. You can choose to sterilise or sterilise and dry in one programme, or just dry the bottles.

All operations are safe thanks to the integrated filter that prevents the ingress of dust particles and dirt during drying. There are two configurations to choose from: FULL - at full load, the ideal function for sterilising and/or drying multiple baby bottles or other items

COMPACT allows sterilising and/or drying small items such as pacifiers and bottle nipples. In addition, the heating insert with ceramic surface prevents blackening due to limescale formation. Automatically alerts you when it's time to descale and clean the product and change the filter.

Features:

- removes 99.9% of harmful household bacteria
- guaranteed protection for 24 hours (when the cover is closed)
- 4 programs in FULL or COMPACT version
- 2 hour delayed start function
- advanced filter
- drying function prevents moisture from settling inside the bottles
- descaling warning

WARNING European standard EN 60335 provides for the protection of child safety by stating that any use of the product by children over 3 years of age must only be carried out under the supervision of an adult. In accordance with the provisions of the current legislation, Artsana SpA states under the warnings required by the regulations: - This appliance may be used by children aged 3 years old and if they are supervised or have received instructions on how to use the appliance safely and whether they understand the dangers involved. Cleaning and maintenance by the user must not be carried out by children unless they are under 8 years of age and working under supervision. Keep the appliance and power cord out of reach of children under 3 years of age - Children should not play with this equipment - This equipment may be used by persons with impaired physical, sensory or mental abilities, or with no prior experience or knowledge provided they are supervised or have been instructed on how to use the equipment safely and understand the hazards involved. However, due to the characteristics of this product category (electric baby bottle warmer), Artsana SpA recommends that children of any age should not use or interact with the product, even under adult supervision. This product is intended for household use only and must be used in accordance with the instructions supplied. Any other use is considered inappropriate and therefore dangerous.- The appliance is intended for indoor use only; do not leave it exposed to sun, rain and other atmospheric conditions.- If the appliance is sold by the original owner or provided by a third party user, instructions for the safe use of the appliance must be passed on and must understand the dangers by reading the user manual and in particular the safety warnings contained therein, which should always accompany the appliance. - This product can run automatically at 50 Hz or 60 Hz - Place the appliance only on flat, level surfaces that are out of reach of children, away from cots and cribs as the appliance and the water in it become very hot during use: always take the utmost care and be careful when using it! Danger of burns - Never use a bottle heater without a water heating tank - To avoid possible burns during and at the end of the operating cycle, take care as: water and the top surface of the appliance can be very hot. Always carefully remove the bottle and/or baby food container at the end of the operation and/or maintenance cycle as they may be hot - Always ensure that the temperature is not too high (no higher than 37°C) before serving warmed food to the baby. - Never move the bottle warmer during use or when it still contains hot liquids - To unplug the bottle warmer, turn the product off by pressing and holding the touch on/off button and then unplug the power cord from the wall outlet. Never pull the power cord or device from which you unplug the appliance from the power outlet - Always make sure the power cord plug is unplugged from the power outlet and that the bottle warmer is cool before moving, cleaning, storing, performing maintenance work, or between warm-up cycles. - Cleaning and maintenance to be carried out by the user must not be carried out by children and/or people with reduced mental capacity or lacking experience or required knowledge - Never immerse or soak the plug, bottle warmer or power cord in water or other liquids - Do not attempt to open or repair the appliance. The bottle warmer can only be opened with special tools. The power cord may only be replaced with another power cord identical to the one supplied with the device; this operation must only be carried out by specialist technicians or by Artsana SpA - The device is preset for the maximum bottle warming time. It is important not to repeat the cycle with the same bottle or jar and it is generally not advisable to reheat food for too long - At the end of the bottle heating cycle, before feeding the warmed milk to the baby, check the temperature is not too high by pouring a drop of milk on the back of your hand - At the end of the jar heating cycle, before feeding the warmed food to the baby, check the temperature is not too high by flavouring with a teaspoon. - When filling the tank with water and when using and handling the product, be careful not to spill liquids or food on the plug - WARNING: at the end of each heating cycle, the surface of the heating element is still hot - Use only the cables supplied with the device - For use in the car, the device must be powered at a safety low voltage of 12V. CAUTION - Do not leave the appliance, its accessories and any packaging materials (plastic bags, cardboard boxes, etc.) within reach of children as these are not toys and can be dangerous - Always ensure that the tl of the product and its components are not damaged before using the bottle warmer. If damage occurs, do not use the bottle warmer and contact a qualified technician or your dealer - Make sure that the voltage and frequency match your mains power supply (see type plate located on the underside of the appliance). The electrical system in which the appliance is used must comply with all safety regulations in force in the country where the appliance is used - Connect the appliance to a mains socket that is easily accessible - Never place the bottle warmer directly on or near hot surfaces, hobs or hobs, or on delicate surfaces that may be sensitive to moisture and/or heat. - Use only heat-resistant plastic or glass baby bottles: do not use disposable bottles - During normal operation of the product, be careful of hot steam due to heating water to avoid possible burns - For hygiene and biological reasons, bottle warmers should only be used to heat food that is already prepared and not to cook food. The recommended temperature for heating food is around 37°C. Do not reheat food more than once or for more than an hour - The final temperature of the food and the reheating time depends on the amount to be reheated, the initial temperature (room temperature or refrigerator temperature), the consistency of the preparation, the reheating mode selected, the type and size of the container used (plastic feeding bottle, glass feeding bottle, baby food jar, milk collection bag) and the amount of water put into the reheating tank. - After one hour of continuous operation, from the end of the heating cycle, the unit switches off automatically. Allow the appliance to cool down completely (switch off and unplug it from the socket) before using it again - After three minutes without use and without a set heating cycle, the appliance will switch off automatically - Do not touch the bottle warmer with wet or damp hands - Do not touch the bottle warmer if it accidentally falls into the water; unplug it immediately and do not use it again. Contact trained qualified technical personnel or Artsana SpA - In case of malfunction and/or failure of the bottle warmer, switch it off and unplug it from the mains, do not attempt to repair and/or service it, but contact only competent and qualified technical personnel or Artsana SpA - For repairs, contact only a qualified technician or Artsana SpA Improper repairs by unqualified personnel may cause damage or injury to users. - If you are in any doubt about the explanations given in this manual, contact us your dealer or Artsana SpA - When disposing of the packaging of accessories subject to wear and tear or the equipment itself separately collection must be carried out with reference to the specific legislation in force in each country. CAUTION - Never place the bottle warmer directly under a running water tap or immerse the appliance, plug or power cord (c) in water or other liquids - Never place the bottle warmer in a dishwasher. CAUTION Milk collection bags, glass baby bottles, jugs and baby bottles with a capacity of less than 150 ml must be placed on the baby food container/feeding bottle support (b) before lowering into the central body (a). This helps to ensure a better grip and prevent burns. Take care that heating water does not spill from the top of the device and that it does not get into the mouths of small baby bottles or glasses. If water leaks out of the central body (a) after inserting the baby bottle, immediately wipe the outer part and the base of the bottle warmer and the power cord and plug with a dry cloth to remove excess water from the tank. Insert the plug into the socket: a long beep sounds. 5. Switch on the interface by touching the on/off touch button (g): an audible signal sounds and the indicator lights (i) start flashing and lighting up gradually. 6. Press the selection button (h) repeatedly to select the heating mode as follows: a. 1 time: for rapid heating - This program is specifically designed for nutrition. The i1 light starts flashing. b. 2 times: for slow heating - This program is specially designed for breast milk. The i2 light will flash. c. 3 times: to heat baby food - This program is specifically designed for the baby food container. The i3 indicator light starts flashing. 7. Start the selected heating cycle by touching the on/off touch button (g): an audible signal sounds. hear and the indicator light for the heating mode will remain on continuously to indicate that the heating cycle is active. After the cycle is selected (point 6), if three minutes pass without the cycle being activated, the device will automatically switch off. CAUTION Freezing milk is not recommended. CAUTION Do not freeze milk in baby bottles that have a removable bottom (such as Chicco Perfect5).

Supplier contact: ARTSANA SPA
Via S. Catelli 1 - 22070, Grandate (CO), Italy, www.chicco.com, +39 800 188 1259