NENO Breast Pump duo electric handsfree Perla Twin

The Neno Perla Twin is an innovative wireless hands-free breast pump that allows you to accomplish a great deal. It is a double version of the Perla breast pump, which allows you to pump from both breasts at the same time. Its lightweight and small design fits effortlessly into a nursing bra cup and allows you to have free hands. The breast pump operates on three phases with 9 levels of adjustment. It has an anatomical breast shield in the shape of a breast, which surrounds the breasts at an angle of 105 degrees, thus helping the flow of milk. Included are two reducers to reduce the size of the breast shield to 19 mm and 22 mm.

Package contents:
- Perla Twin breast pump
- 2x USB type C cable
- 2x 26 mm silicone breast shield
- 2x breast shield reducers 22 mm and 19 mm
- 2x 120ml milk container with closure
- 4× silicone insert
- 4× valve
- 2x bra pads
- user manual
- 2x connector
- Velvet storage bag

Technical parameters:
- Dimensions: 130×110×65 mm
-Weight: 2 x 277g
- Automatic shutdown: after 30 minutes
- 9 adjustment levels
- Charging time: 2 hours
- Operating time: up to 120 minutes
- Battery capacity and type: 3.7 V 1100 mAh Li-Ion
- Charging port: USB type C
- Suction power in stimulation mode: 3–21 kPa; mixed: 14–37 kPa;
- Suction power in deep suction mode: 15–38 kPa

1. Do not use the breast pump during pregnancy - it may cause premature birth.
2. Do not use the device if you suffer from a chronic illness or hypersensitivity,
that would cause you pain when using the breast pump.
3. Before each use, make sure that no part is damaged. Do
do not use the breast pump if any part is visibly damaged.
4. Keep the device out of the reach of children and domestic animals.
5. Do not subject the device to mechanical damage caused by, for example
falling.
6. Keep the silicone parts of the breast pump away from hot surfaces
distortion.
7. Whenever you intend to store expressed breast milk, clean and disinfect
the breast pump first.
8. Do not clean the machine parts with abrasive agents.
9. Do not attempt to repair the breast pump yourself – this will invalidate its
warranty.
10. If using the device causes pain or serious discomfort, turn it off and move
the breast pump away from your breast.
11. Do not connect the charging device to a higher voltage than indicated.
02. BEFORE FIRST USE
1. Connect the breast pump to a power source. Charge the batteries for 2
hours.
2. Disconnect the parts of the breast pump that will come into direct contact with
the breast or milk.
3. Unscrew the milk container from the joint.
4. Pull the valve down to disconnect it from the connector.
5. Remove the connector and membrane.
6. Clean the appliance components (see CLEANING AND DISINFECTION section).

Manufacturer's address: KGK Trend sp. z o.o., ul. Ujastek 5b, 31-752 Kraków, Poland. info@kgktrend.pl, NIP 678 315 51 46